<A> Press Inox M profile is a flame-free fitting, manufactured using high quality stainless steel material which can be used for multiple applications. 

The range is available in two different materials:

-          Stainless steel 1.4404 (AISI 316L): Designed for drinking water installations facing the highest hygienic requirements. The fittings are DVGW certified and available from 15 – 54 mm.

-          Stainless steel 1.4301 (AISI 304): Especially designed for heating installations these fittings are not suitable for drinking water and are marked with a red symbol. Available from 15 – 108 mm.

<A> Press Inox is installed with a mechanical press tool with a compatible M profile jaw to fit each fitting size. When pressure is exerted through the press tool a permanent joint is made and the fitting cannot be dismounted or re-used. <A> Press Inox also benefits from patented 'leak before press' O-ring technology which indicates if a joint has not been pressed (fittings sized 15 – 54 mm).

Benefits summary

-          Easy to use

-          Reduced installation time and cost

-          Permanent, flame-free connection

-          No hot works permit required
Leak before press indicator assists identification of unpressed joints

Please check out our technical brochures and documents for further information or contact us directly to book product training.