Conex Bänninger created a leak....To get a secure, long-life, leak-proof joint
Northern Europe

Conex Bänninger created a leak....To get a secure, long-life, leak-proof joint

8 May 2014

To ensure that you never miss an unpressed joint again, Conex Bänninger created a long-life, leak-proof >B< Press fitting. Developed with a unique pressing indicator,  a specially designed O-Ring that has a reduced section in two positions causing leaks at low pressures when not pressed (from 0.1 to 5.0 bar) and available in three colours black, yellow and green. Without going to full test pressure, when tested they will leak profusely alerting you to unpressed joints.

When the fitting is pressed, the o-ring material compresses, filling the gaps, securing a leak-free path. The >B< Press profile has the advantage of a 3-point press, two mechanical presses either side of the bead, and one hydraulic press, crimping the o-ring, providing a more secure joint. 

Conex Bänninger >B< Press fitting is user friendly and very quick to install leading to labour costs savings, as well as  the advantage of a flame free installation posing no fire risk. The leading edge design ensures any damages to the O-Rings are reduced during assembly.

Manufactured and designed in accordance with BS 8537, EN 10305-3 and EN 10312- 1:2. Conex Bänninger >B< Press is a versatile press fitting system for use with hard, half-hard and soft copper, carbon and stainless steel tube. They are available in Copper, Red Brass, Carbon and Stainless Steel; in sizes 12 to 108mm and are suitable for water, heating, cooling, gas and solar applications.

 >B< Press fittings are compatible with various press tools and jaws. For more details on this product range please visit out product site.

< Other News